Application range of Cable Drag Chain

Cable Drag Chain is your good choice.Drag chain cables are mainly used in: industrial electronic systems, automatic generation lines, storage equipment, robots, fire fighting systems, cranes, CNC machine tools and metallurgical industries.
General requirements for drag chain cables:
1. The laying of towline cables must not be twisted, that is, the cable must not be unwound from one end of the cable drum or cable reel. Instead, the cable reel or cable reel should be rotated to unwind the cable. If necessary, the cable can be unrolled or suspended. The cable used for this occasion can only be obtained directly from the cable roll.
2. Attention must be paid to the minimum bending radius of the cable. (The relevant information can be found in the flexible drag chain cable selection table).
3. The cables must be laid loosely side by side in the drag chain, arranged separately as much as possible, separated by spacers or penetrated into the separation cavity of the bracket void, the gap between the cables in the drag chain should be at least 10% of the cable diameter.
4. The cables in the drag chain must not touch each other or be trapped together.
5. Both points of the cable must be fixed, or at least at the moving end of the drag chain. Generally, the distance between the moving point of the cable and the end of the drag chain should be 20-30 times the diameter of the cable.
6. Please make sure that the cable moves completely within the bending radius, that is, it cannot be forced to move. In this way, the cables can be moved relative to each other or the guiding device. After a period of operation, it is best to check the position of the cable. This inspection must be performed after the push-pull movement.
7. If the towline is broken, the cable also needs to be replaced, because damage caused by excessive stretching is unavoidable.Cable Drag Chain is your good choice.